Peterson Spring

Spring manufacturer | Springs, snap-rings, wire forms, clips, clamps, stampings

  • Home
  • Markets
    • Aerospace / Defense
    • Agriculture
    • Automotive
    • Construction
    • Consumer Products
    • Medical / Healthcare
    • Recreational Vehicles
    • Specialty Products
  • Products
    • Large Wire Diameter Springs
    • Die Springs
      • Standard Inch Series
      • ISO Inch Series
      • ISO Metric Series
    • Engine Valve Springs
    • Springs: Compression, Extension, Torsion
    • Clips & Hose Clamps
    • Rings
    • Stampings
    • Sub-Assemblies
    • Wire Forms
    • Specialty Products
  • Authorized Distributors
  • Engineering
    • Spring Terms
  • About Us
    • Locations
    • Quality Assurance
    • News
    • Video
  • Contact

Rings

Single Ring

Just as springs are used as energy storage devices, various rings can be used in a similar fashion.  Given their wide range of uses and flexibility, Peterson Spring boasts an unparalleled ability to fill the ring requirements of any client regardless of the industry.

Peterson Spring uses custom-designed, state-of-the-art machines and equipment to produce a wide variety of rings in an economic and environmentally responsible manner.  They are mass-produced allowing cost-conscious clients access to Peterson Spring’s entire product catalog. Check out our new Retaining Rings Catalog here! http://www.pspring.com/downloads/

Snap Rings

Snap rings – commonly referred to as “retaining rings” – provide shoulders to locate or retain parts on shafts or in cylinders.  Depending on the application, snap rings can be used externally or internally.

Peterson Spring specially designs equipment to produce snap rings with maximum efficiency in the most cost-effective and environmentally responsible manner.  Skilled operators produce millions of coiled rings each year on state of the art equipment.  Coiled rings boast an important cost advantage over stamped rings by eliminating blanked scrap and avoiding the need for cost-prohibitive tooling along with a hardening process.

Peterson Spring is capable of producing rings with inner diameters ranging from .062” to 72”.  Assembly, disassembly and identification are assisted by nearly limitless gap configurations.  A variety of notches or holes and ground surfaces at the ring gap can also be provided.

Transmission Rings

Manufactured in a similar manner to mass-produced snap and retaining rings, transmission rings are engineered specifically to meet the intense demands of powertrain systems.  Specially designed to withstand extreme wear and tear, Peterson Spring manufactures retaining and wave rings in a cost-conscious way, thereby ensuring that our customers are receiving the best available product at the most competitive price.

Retaining Rings

Retaining rings – commonly referred to as “snap rings” – provide shoulders to locate or retain parts on shafts or in cylinders.  They can be used internally or externally, depending on the application.

Peterson Spring specially designed equipment to produce retaining rings with maximum efficiency in the most cost-effective manner possible.  This is key to remaining competitive with cost-conscious clients.  Skilled operators produce millions of coiled rings each year on state of the art equipment.  Coiled rings boast an important cost advantage over stamped rings by eliminating blanked scrap and avoiding the need for cost-prohibitive tooling along with a hardening process.

Peterson Spring is capable of producing rings with inner diameters ranging from 1.57 mm to 1830 mm.  Nearly limitless gap configurations assist with assembly, disassembly and identification.  Ground surfaces and a variety of notches or holes at the ring gap can also be provided.

Specialty Products

… Find Out More »

Peterson Spring quote for springs

The best products, coupled with practical, innovative thinking

Established in 1914, Peterson Spring is the largest privately held spring manufacturer in North America. Through designing, manufacturing and supplying springs, snap-rings, wire forms, clips, clamps, stampings, and a variety of sub-assemblies, Peterson Spring has expanded to 12 worldwide locations.
Spring manufacturer in North America Request a Quote

Quick Links

  • Home
  • About Us
  • Locations
  • News
  • Video
  • Downloads

Affiliations

OESA IST

HDMA-bw (1) British American Business Council
SMISME

Copyright © 2025 Peterson Spring · All Rights Reserved
Global Purchasing Terms & Conditions
Privacy Policy | Terms of Service